钢结构_钢结构厂房_钢结构平台_钢结构加工厂家--佛山市胜邦钢结构有限公司

Language:CHINESESENGLISH

Home > News > Engineering Technology: General requirements for inspection of steel structure engineering foundation
CONTACT US
  • Address:Pingtang Industrial District, Shipeng Village, Shishan Town, Nanhai District, Foshan City,
  • Phone:0757-81002668/0757-63323396
  • Fax:0757-81196682
  • Contact:Ben Zheng/13826981293 Kerry Lu/13751224830
  • E-mail:sbs@sbsprefabhouse.com
  • URL:http://www.sbshouses.cn

Engineering Technology: General requirements for inspection of steel structure engineering foundation

Time:[2015-1-14]  Hits:4187

Engineering Technology: General requirements for inspection of steel structure engineering foundation

     Steel installation before positioning axis response, infrastructure and elevation axes, bolt size and location of the building, such as review, and should be the basis for the handover inspection and acceptance. Such as anchor bolts required to review each bolt axis, elevation, to go beyond regulatory requirements, must take appropriate remedial measures. Such as increasing the size of the column bottom in the column base plate according to the actual location of re-drilling screws.
     When the transfer of basic engineering batches, each less than a handover acceptance column base can form the basis of the degree of spatial steel mounting unit and shall meet the following requirements: basic strength of concrete to meet the design requirements; tamp backfill around the foundation is completed; foundation the elevation and the datum axis signs and point accurate and complete; the top surface of the foundation should be flat base surface of the secondary should be watered at cutting hair, anchor bolts should be intact.
The column axis bomb test in place of the column base surface.
     The column base level for leveling. Pouring concrete column base elevation is generally reserved for 50 to 60 mm (compared with steel column base design elevation), the installation is a steel plate or take advance using slurry leveling boards.
     When using the steel plate to make the support plate, the steel plate in the area before the bottom of the column should be secondary grouting withstand tensile load and bolt tightening calculated and determined according to the following compressive strength of concrete foundation, columns soles of the feet. Base plate and the contact surface and the bottom surface of the column should be smooth, tight.
     When the syrup should be used to sit for the board using non-shrink mortar, mortar pad before lifting pillar strength should be higher than a grade basis of concrete strength and mortar pad area should be sufficient to meet the requirements of hosting.

Copyright:佛山市胜邦钢结构有限公司 Foshan Shengbang Steel Structure Co., Ltd. Record Number:粤ICP备13078463号
多功能气候环境试验室| 电源适配器厂家价格批发| 西门子伺服控制器维修| 防爆照明动力配电箱| 不锈钢过滤网| 青岛联众输送带专业生产厂家| 波纹管截止阀| 电磁流量计厂家| 巡更通信系统| 建筑扣件| 全功能高压开关特性测试仪| 板式弯板链条| 中效滤袋| FAKRA线束生产线| 派克先导式电磁阀| 酒精沉淀罐| 高强螺栓抗滑移系数检测仪| BIW| 双85恒温恒湿试验箱厂家| 蓄电池放电仪| 叠加式溢流阀| 优普| METRIX变送器| B9901AX| 探伤机| 岛津气质联用仪| PDCR300系列压力传感器| 蒸发冷冷水机| 全自动CIP清洗设备| 真空波纹管真空配件| 水车专机| 环保空调| 超声波焊接机.热板机.振动摩擦机.高频诱导机.金属焊接机厂家| 预付费电能管理| 电热石英吸收管| 电池扫描测试仪| 冻干机品牌| 电动装载机品牌| 紫外分光光度计()| 真空扩散焊接炉| TDLAS控制系统方案|